TANIGUCHI 40mm Lift Standard Plus Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 40mm Lift Standard Plus Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 40mm Lift Standard Plus Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 40mm Lift Standard Plus Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 40mm Lift Standard Plus Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 40mm Lift Standard Plus Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 40mm Lift Standard Plus Suspension Kit Jimny JB74 (2018-ON)

A Kit that creates great ride comfort and high driving performance by including appropriate correction parts. We recommend these products as the best all-round suspension kit for Jimny in Japan because they ensure a stable ride!

These Adjustable Shock Absorbers and Coil Springs are specifically designed by TANIGUCHI for new Jimny (2018-ON). Both computer simulations and off-road, high speed and city driving tests were conducted numerous times.
Dual-rate Coil Springs are always allowing for a stable and smooth ride. Shock Absorbers can be adjusted in 14 steps, enabling settings to suit various driving styles. And due to the long suspension travel and low center of gravity, it's also excellent on rough roads. Made in Japan.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.

Please note that these products are designed for a RHD (right-hand drive) Jimny, but it is possible to install them for a LHD (left-hand drive) as well. Actually, several of our LHD customers have already installed these products without any issues. If there is a difference in height between the left and right, please consider using the coil spacers. However, this has not been tested and may not work on all models. This product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

A) 40 mm Lift Standard Suspension Kit (141,600 JPY) includes Coil Springs, Shock Absorbers, and 50mm Extended Brake Hoses.
B) 40 mm Standard Plus Suspension Kit (160,200 JPY) includes Standard Kit plus two of Caster Correction Bushes 5.0, and Rear Panhard Rod Relocation Bracket.
C) 40 mm Lift Premium Suspension Kit (204,500 JPY) includes Standard Plus Kit plus Front and Rear Adjustable Panhard Rods, and X-Large Extended Bump Stops.

[ Required ]
- Remove front cross member or replace with Drop Cross Member

[ Recommended ]

- Front and rear adjustable Panhard rods
- Extended rear bump stops (X-large Bump Stops or Figure 8 Bump Stops etc.)

* Because of using the shock absorbers with a long suspension travel, tires may hit the body on hard off-road driving. So, adding the X-large Bump Stops is recommended. Figure 8 Bump Stops are also recommended for hard off-road driving. Brackets are required for installing the Figure 8 Bump Stops.

[ Required in some cases ]
- Headlight Leveler Fixed Stay or Adjustable Headlight Leveler Rod
- Stabilizer Relocation Bracketlock etc.

 

Coil Springs

free length (mm)

spring rate (N/mm)

FR 383.7 21.0 / 24.0

FL 

364

21.0 / 24.0

RR

351

23.0 / 25.0

RL

332

23.0 / 25.0

 Shock Absorbers

 

front

rear

extended length (mm)

475

525

compressed length (mm)

297

331

Applicable vehicles: Jimny (2018-present) JB74, 64 RHD (right handle drive)
Brand: TANIGUCHI
Lift height: front 35mm, rear 40mm (JB74)
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

TANIGUCHI 40mm Lift Standard Plus Suspension Kit Jimny JB74 (2018-ON)

Regular price ¥160,200 ¥0 Unit price per

A Kit that creates great ride comfort and high driving performance by including appropriate correction parts. We recommend these products as the best all-round suspension kit for Jimny in Japan because they ensure a stable ride!

These Adjustable Shock Absorbers and Coil Springs are specifically designed by TANIGUCHI for new Jimny (2018-ON). Both computer simulations and off-road, high speed and city driving tests were conducted numerous times.
Dual-rate Coil Springs are always allowing for a stable and smooth ride. Shock Absorbers can be adjusted in 14 steps, enabling settings to suit various driving styles. And due to the long suspension travel and low center of gravity, it's also excellent on rough roads. Made in Japan.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.

Please note that these products are designed for a RHD (right-hand drive) Jimny, but it is possible to install them for a LHD (left-hand drive) as well. Actually, several of our LHD customers have already installed these products without any issues. If there is a difference in height between the left and right, please consider using the coil spacers. However, this has not been tested and may not work on all models. This product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

A) 40 mm Lift Standard Suspension Kit (141,600 JPY) includes Coil Springs, Shock Absorbers, and 50mm Extended Brake Hoses.
B) 40 mm Standard Plus Suspension Kit (160,200 JPY) includes Standard Kit plus two of Caster Correction Bushes 5.0, and Rear Panhard Rod Relocation Bracket.
C) 40 mm Lift Premium Suspension Kit (204,500 JPY) includes Standard Plus Kit plus Front and Rear Adjustable Panhard Rods, and X-Large Extended Bump Stops.

[ Required ]
- Remove front cross member or replace with Drop Cross Member

[ Recommended ]

- Front and rear adjustable Panhard rods
- Extended rear bump stops (X-large Bump Stops or Figure 8 Bump Stops etc.)

* Because of using the shock absorbers with a long suspension travel, tires may hit the body on hard off-road driving. So, adding the X-large Bump Stops is recommended. Figure 8 Bump Stops are also recommended for hard off-road driving. Brackets are required for installing the Figure 8 Bump Stops.

[ Required in some cases ]
- Headlight Leveler Fixed Stay or Adjustable Headlight Leveler Rod
- Stabilizer Relocation Bracketlock etc.

 

Coil Springs

free length (mm)

spring rate (N/mm)

FR 383.7 21.0 / 24.0

FL 

364

21.0 / 24.0

RR

351

23.0 / 25.0

RL

332

23.0 / 25.0

 Shock Absorbers

 

front

rear

extended length (mm)

475

525

compressed length (mm)

297

331

Applicable vehicles: Jimny (2018-present) JB74, 64 RHD (right handle drive)
Brand: TANIGUCHI
Lift height: front 35mm, rear 40mm (JB74)
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

Shipping calculated at checkout.